Renogy New 200 Watt 12 Volt Solar Premium Kit

• Efficient Performance:  The Premium Kit will produce an average of 0.8-1.2kWh of electricity per day (depending on sun availability). By bypassing the shaded cells with poor performance, the bypass diode minimizes the power drop caused by the shadow to ensure excellent performance in a low-light environment.

• Solid Quality:  Advanced encapsulation material with multi-layered sheet laminations to protect cells from physical damage or distortion, improving cell performance and providing a long service life. Corrosion-resistant aluminum frame ideal for outdoor use. TPT back sheet dissipates excess heat, ensuring smooth output performance. EL tested; 5-year material and workmanship warranty.

• Ready to Install:  Pre-drilled holes on the back frame allow quick installation. The kit has a complete set of accessories and is equipped with an In-line fuse and ANL fuse components to offer more protection.

• Stay Connected:  Easily monitor by your phone. The BT1 Bluetooth module can pair with Renogy DC Home App and transmits system operation data directly to your phone, the Bluetooth signal available up to 82ft.

• Full System Protection:  Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current. Equipped with an In-line fuse and ANL fuse components, devised to add overcurrent protection on your charge controller and battery bank.

Note: 

• To connect the panels in series, you do not need to use the Solar Y Branch Connectors in the kit. The included in-line fuse is intended for use ONLY with a series configuration.
• To connect the panels in parallel, you must use the included Solar Y Branch Connectors, and you will NOT be able to use the included in-line fuse.
• For a parallel configuration, we recommend installing an in-line fuse rated for a current GREATER than the sum of the short circuit current of each panel in parallel in your system.

The Renogy 200W 12V Premium Kit is easy for you to install, and it is the most economical choice for the off-grid adventurer. Renogy Solar Kit comes with solar panels, charge controllers, and needed electrical wiring, fuses, and monitoring typically required for an off-grid installation, making it ideal for both off-grid and mobile solar power applications.

The Premium Kit will produce an average of 1000Wh of electricity per day (depending on sun availability). The 2×100W solar panels don't take up much roof space, but their energy can offset loads such as lighting, camera, and projector.

The Premium Kit can build a reliable and environmentally friendly power supply, perfect for all rooftops, RVs, boats, or campers. It can also be installed in a ground mount system as a power supply for outdoor appliances, emergencies, and a stand-alone power system.

Specifications:

RENOGY 100W MONOCRYSTALLINE SOLAR PANEL

• Maximum Power: 100W
• Maximum System Voltage: 600V DC (UL)
• Open-Circuit Voltage (Voc): 24.3V
• Optimum Operating Voltage (Vmp): 20.4V
• Short-Circuit Current (Isc): 5.21A
• Optimum Operating Current (Imp): 4.91A
• Dimensions: 41.8 x 20.9 x1.4 in
• Weight: 14.1lbs

ROVER LI 20A MPPT CHARGE CONTROLLER

• Nominal Voltage: 12V/24V DC Auto Recognition
• Rated Charging Current: 20A
• Rated Load Current: 20A
• Max. Battery Voltage: 32V
• Max. PV Input Power: 260W/12V, 520W/24V
• Max. PV Input Voltage: 100VDC
• Operating Temperature: -35°C to +45°C
• Max.Terminal Size: 8AWG
• Rated Load Current: 10% to 90% NC
• Overall Dimension: 8.3 x 5.9 x 2.3 in

20FT 10AWG SOLAR ADAPTOR KIT (A PAIR)

• Length: 20ft
• Wire Gauge: 10AWG
• Rating Voltage: 600/1000V
• Temperature: -40°F to +185°F

RENOGY 8FT 10AWG TRAY CABLES (A PAIR)

• Rating Voltage: 600/1000V
• Length: 8ft
• Wire Gauge: 10AWG
• Temperature: -40°F to +185°F

2FT 10AWG ANL FUSE CABLE

• Length and Wire Gauge: 2ft and 10AWG
• Rating Voltage: AC Uo/U 0.6/1 KV, DC 1.8KV
• Temperature: -40°F to +194°F

RENOGY 10A IN-LINE FUSE HOLDER W/FUSE

• Rated Current: 10A
• Rated Voltage: 1000 V DC
• Contact Material: Copper, Silver Plated
• Replaceable Fuse: Cylindrical PV Fuse (10x38mm)

ANL 20A FUSE SET

• Current Rating: 20A
• Voltage Rating: 72V
• Interrupt Capacity: 40A

SOLAR Y BRANCH CONNECTORS

• Withstanding voltage: 1000V DC(TUV), 600V(UL)
• Temperature: -40°F to +194°F
• Protection Class: Class II
• Protection Degree: IP67, mated
• Rated Current: 50A

BT-1 BLUETOOTH MODULE

• Input Voltage: 5V
• Communication Range: ≤82ft
• Compatible With: All Renogy Controllers with RJ12 port
• Operating Temperature: - 20℃~85℃（-4°F to 185°F）

MOUNTING Z BRACKETS (SET)

• Eight Long Cap Bolts and Four Short Bolts: Four Spring Washers and Four Washers
• Four Z Shape Solar Panel Brackets: Four Nuts

WARRANTY INFORMATION

• Panels: 25-year power output warranty: 5 year 95% output warranty, 10 year 90% output warranty, 25 year 80% output warranty 10-year material and workmanship warranty
• Accessories: 1-year material and workmanship warranty

Package Includes:

• 2 x 100W Mono Solar Panel
• 1 x Rover 20A MPPT Charge Controller
• 1 x 20ft 10AWG AK
• 1 x 2ft 10AWG Fuse Cable
• 1 x 8ft 10AWG Tray Cable
• 2 x Mounting Z Brackets (Set)
• 1 x BT-1 Bluetooth Module
• 1 x 10A In-line Fuse and 20A ANL Fuse
• 1 x Solar Y Branch Connectors MMF+FFM Pair